Viega 78092 ProPress Reducer Fitting FTG x C 1-1/4" x 3/4" Copper 3AV60

About this item

This Viega ProPress reducer, part 78092 (also marked 3AV60), joins a 1-1/4 inch press fitting to 3/4 inch copper tube. FTG x C means one end is the same size as the fitting and slides into a 1-1/4 inch socket, while the press cup end takes 3/4 inch tube.

How does a ProPress FTG x C reducer install?

Push the FTG end into a 1-1/4 inch ProPress fitting and insert the 3/4 inch tube into the cup. Then press both joints with a tool and jaws in the right size for each end. You don't need a torch or flux.

• Condition: new, open box. Check the seller photos to see the packaging and the seal inside the fitting.
• Count: one fitting at $16.14.
• Prep: cut the tube square, deburr it and mark the insertion depth.
• Permits: confirm press fittings are approved for your system under local code.

Need more than one? Contractors can request a wholesale quote through our site.