VIEGA 20730 ProPress 4" x 3" P1 x P2 Reducer, Copper (1) - NEW

About this item

Need a Viega ProPress 4 x 3 copper reducer to step a large copper main down without a torch? This listing offers one new Viega 20730 reducer marked P1 x P2. It is a press-connect fitting for moving from 4-inch to 3-inch copper tube on commercial water and hydronic runs.

Will this 4 x 3 ProPress reducer fit my tubing?

It is sized for 4-inch and 3-inch nominal copper. Confirm the P1 x P2 end configuration in the seller's photos and description so it matches your layout.

• Joining method: press connection. You need a ProPress tool with rings rated for these large sizes.
• Flame-free work: useful in occupied buildings where hot work permits are a hassle.
• Prep: cut square, deburr and mark insertion depth before pressing.
• Code: check local plumbing code and permit rules for your system.

Sold by an independent eBay seller and covered by the eBay Money Back Guarantee. Ordering several? Request a wholesale quote on our site.