Plumbing Solder Kit - 1/4 lb Lead-Free Solder & 1.7 oz Flux for Copper Pipes

About this item

Sweating copper takes two consumables, and this lead-free plumbing solder kit includes both: 1/4 lb of lead-free solder and 1.7 oz of flux, made for copper pipes. That's a practical amount for a few repairs or a small bathroom rough-in.

Why use a lead-free plumbing solder kit on drinking water lines?

In the U.S., drinking water systems require lead-free solder and flux, and local code may add its own rules. Check the listing for the solder alloy and flux type.

• Clean and flux: sand the pipe and fitting to bright copper, then brush on a thin coat of flux.
• Heat the fitting: let the hot joint melt the solder, not the flame.
• Wipe: clean off flux residue once the joint cools.
• Volume: crews can request a wholesale quote on our site.

Sold by an independent eBay seller and covered by the eBay Money Back Guarantee.