Viega 77260 ProPress Cap 3/4 Copper

About this item

A Viega 77260 ProPress cap closes off 3/4" copper with a press tool. You skip the torch and flux, and the line doesn't have to be drained bone dry. This single fitting is listed as new, open box, at $9.99 by an independent eBay seller.

What do I need to install a 3/4" ProPress copper cap?

You need a compatible press tool with 3/4" ProPress jaws or rings. You also need a tubing cutter, a deburring tool and a marker for insertion depth.

• Prep: cut square, deburr and mark insertion depth on the tube.
• Seal: because it is open box, check the photos. Look inside the cap before pressing to make sure the sealing element is present and undamaged.
• Hot work: press fittings suit occupied buildings where open flame is a concern.
• Code: confirm that press fittings are accepted for your application locally.

Running a press crew? Request a wholesale quote on our site.