Lot of 10 Nibco PressG 1/2" Press x Press 45 Elbow PCH606- Copper

About this item

This lot of 10 Nibco PressG 1/2 inch 45 elbows (PCH606) is press x press, so both ends connect to 1/2 inch tube with a press tool instead of solder. Ten pieces is a practical quantity for a rough-in with several offsets.

What should you check before using Nibco PressG 45 elbows?

Check the listing and the manufacturer's literature for the intended service (water, gas or other) and the tube type. Use the jaws the fitting specifies.

• No flame: handy in finished spaces and occupied buildings.
• Prep: cut square, deburr and mark the insertion depth.
• Inspection: gas and water work usually needs a permit, so check local code.
• Count: 10 elbows per lot.

Contractors buying in volume can request a wholesale quote on our site. Purchases are covered by the eBay Money Back Guarantee.