Cerro Flow Copper Type M Hard Straight Pipe 3/4" x 12-1/2"

About this item

Fixing one leaking section rarely calls for a full stick of pipe. This Cerro Flow 3/4" Type M copper pipe is a hard straight piece cut to 12-1/2". It works for a patch, a short stub or a jumper between two fittings.

Where can I use 3/4" Type M copper pipe?

Type M is the thinner-wall grade and is common for indoor water lines in many homes. Some areas restrict its use, so check your local code before cutting into a supply line.

• Joining: sweat/solder it with 3/4" copper fittings, or use press or push-to-connect fittings sized for copper tube.
• Prep: deburr the cut end and clean it to bright metal before you flux.
• Hard temper: this pipe doesn't bend, so plan elbows for any turns.
• Fit check: measure your gap first, since the 12-1/2" length may need trimming once the fittings are seated.

Covered by the eBay Money Back Guarantee. Contractors buying in volume can request a wholesale quote through our site.